Non-linear design is when a typical, cross section-based design does not generate the intended result. Typically for designs that are non-parallel, such as driveways, car parks, commercial / Industrial, residential & retaining wall projects. In this webinar, our expert, Jonathan Taylor will show you how to use the Civil Site Design tools to tackle these types of projects. Exploring Grading Strings and surface based design, including staple tools such as Insert Sections, Surface Extend, Design Constraints and Model Builder. Stick around towards the end where you can see how to use the Driveway Checker to review the proposed crossing.
0:00 Introduction & Overview
6:47 Kerb Reconstruction & Drive Crossing
10:40 Surface Extend
14:50 Paste Surface
16:10 Connecting the Road CL
18:42 Designing the edge codes strings
23:32 Transitioning with Design Constraints
31:58 Threads
33:14 Design Variation – Match to Strings
37:35 Model Builder
42:00 Matching Non-Linear Strings
43:30 Surface Extend
45:46 Edge 1 – Auto Profile
48:02 Inserting Grading String Sections
50:30 Edge 2 – Auto Profile
53:34 Parking Island
56:59 CAD Objects with Model Builder
59:30 Driveway Checking Proposed Designs
1:01:46 Grading Strings vs Profile Strings
1:03:45 Grading String Subgrade
Check out the performance improvements we've introduced into Civil Site Design V24.20 when you're working in the Vertical Grading Editor window.
We've enhanced the superelevation tools to make it easier for you to quickly and easily assess output of rules-based superelevation, and to make it simple for you to use this tool to vary pavement crossfalls and widths.
Civil Site Design, Stringer Topo & Corridor EZ V24.10 forms will accomodate 4K text scaling.
Bulk earthworks play a key part on many projects and determining the volumes can be a time consuming process. Released in Civil Site Design V23.10, the Subgrade Model Manager (SMM) was developed to assist users with creating subgrade surfaces of any model within the project.